Top 1 freezer truck factory
#
  • Freezer truck Box breakdown diagram
    May 11, 2022 Freezer truck Box breakdown diagram
    I: Box breakdown diagram Exploded diagram of freezer box II: Main material list of insulation compartment parts The front wall, the roof, the left and right panels are all "sandwich" plate structures. Sheets are all treated with overall compression and their overall strength of the sheets reach international standards. For sheet cutting, CNC gantry milling machine is adopted to ensure precision parameters of each component. Type and thickness of the sheet (mm): Sandwich composite sandwich plate Outer covering Inner covering Insulation layer (plate) thickness Roof: Aluminum alloy flat plate FRP flat plate 100mm polyurethane foam Side plate: Aluminum alloy flat plate Aluminum alloy flat plate 80mm polyurethane foam Front wall: Aluminum alloy flat plate Aluminum alloy flat plate 100mm polyurethane foam Rear door: Aluminum alloy flat plate Aluminum alloy flat plate 80mm polyurethane foam Bottom plate: Bamboo plywood FRPplate 80mm polyurethane foam(composite structure) Floor: A 2.5 mm pattern aluminum alloy plate is laid on the bamboo plywood. III: Selection of insulation core layer: In order to ensure the insulation effect and strength of the compartment, the selection of the insulating core is particularly important. The insulation core layer used by the company is rigid polyurethane foam board and main technical parameters and performance are as follows: Density: 45 to 50KG/M3 Heat conductivity coefficient: 0.018 to 0.023W/M·K Compressive strength: ≥0.2Mpa Adaptive temperature: –50°C to +70°C IV:  Design of back door and door frame: Decomposition diagram Design of back door and door frame allows it can be open at 270 degree. Material of the door bracket is a 2.5-millimetre-thick stainless steel sheet, which enhances rain and dust proof. The bracket and the carriage is connected with rivets . ABS calcium plastic material are put among the back door bracket and other plates to avoid the cold bridge. The plate clamp the labyrinth tape consist the back door structure. The labyrinth type can offer multiple layers of protection to avoid the cold air leakage. The back door is still a sandwich plates structure. The inner layer is a 12 -millimetre-thick water prof plywood. It is durable and will not go rot. Inside of the plywood uses polyurethane to keep warm. The back door is enclosed with several layers of labyrinth tape to keep the leakage ratio h-1 less than or equal to 1.2. V: Refrigerating unit The truck is equipped with Thermo King refrigerating unit KV300.  Since 1938, products and components from Thermo King have become the st...
    Read More
  • Solution for Refrigeration unit?
    March 17, 2022 Solution for Refrigeration unit?
    HOW TO SOLVE THE PROBLEM OF TRUCK REFRIGERATION UNIT DURING TRANSPORTATION? In the cold chain supply chain, truck refrigeration unit have been such an integral part of the supply chain, that it’s impossible to imagine life without the truck reefer unit transport. As we all know, using the refrigeration unit is the only way to maintain freshness, prevent deterioration, and maintain value during the transportation of products. As the global cold chain transportation trade increases year by year, and customers continue to demand refrigerated products With the increase, the refrigeration unit for truck has become more and more popular with customers. With the fast cooling effect and excellent storage performance, the truck freezer unit is the first choice for refrigerated transportation. In the long-distance transportation process, the refrigeration unit for truck can be applied to agricultural products, meat and dairy products, fresh seafood, baked products, etc., as well as other sensitive items such as medical products and medicines. To avoid and solve the problem of deterioration and deterioration caused by stored products during long-distance transportation, the refrigeration units we provide have a variety of classifications, which are more convenient to use.  As long as the user provides the truck model of the stored product, you can find a suitable truck refrigeration unit. If you’re looking for refrigerated vans and trucks, you’ve come to the right place. Powerstar Trucks specializes in refrigerated trucks and vans for a wide range of applications.
    Read More
  • Refrigerated truck cooling method
    September 10, 2021 Refrigerated truck cooling method
    There are many kinds of refrigeration methods for refrigerated trucks. The following is a brief introduction to 5 commonly used refrigeration methods by the refrigerated truck manufacturer: 1. Water ice and salt ice refrigeration: The water ice refrigeration device has low investment and low operating costs, but the heat absorption per unit mass of ordinary water (salt) ice is small, the cooling in the car is limited, and the melting of the salt ice will pollute the environment, Food, corroded compartments, and value cargo damp, Therefore, water (salt) ice refrigeration is mainly used for refrigerated transportation of fish and other aquatic products. 2. Dry ice refrigeration: simple installation, low investment and operating costs, easy to use, and the goods will not be affected by moisture. The CO2 gas produced by the sublimation of dry ice can inhibit the reproduction of microorganisms, slow down fat oxidation and impair the respiration of fruits and vegetables. However, the sublimation of dry ice can easily cause frost, and excessive CO2 gas will cause difficulty in breathing and necrosis of refrigerated items such as fruits and vegetables. Moreover, the temperature in the compartment is difficult to adjust, the cost of dry ice is high, and the consumption is large, so the practical application is less. 3. Cold plate refrigeration: The device itself is heavier and bulkier, occupying a certain volume of the carriage, and the cold plate can only work for 8~15H once it is charged and cooled. Therefore, cold plate refrigeration is suitable for medium and short-distance transportation of medium and light refrigerated vehicles. In recent years, with the increasingly prominent problems of energy and environmental pollution, the application of cold plate refrigeration has developed rapidly, and it has become the second largest refrigeration after mechanical refrigeration. Way. 4. Liquid nitrogen refrigeration: the device has a simple structure, reliable operation, no noise and pollution; liquid nitrogen has a large refrigeration capacity and rapid refrigeration, and is suitable for quick freezing. The vaporization of liquid nitrogen will not cause moisture in the compartment, and nitrogen is good for food preservation and prevention of dry consumption. In addition, the liquid nitrogen refrigeration temperature is precise (plus or minus two degrees). However, the cost of liquid nitrogen is high and it needs to be filled frequently, so the promotion is limited. Similarly, Other low temperature vaporized liquid gases can also be used as refrigerants, such as liquid carbon dioxide. 5. Mechanical refrigeration: Mechanical refrigeration methods include vapor compression, absorption, and vapor injection. At present, the vapor compression type is the most widely used. Compression refrigeration unit is mainly composed of compressor, condenser, throttle valve (or expansion valve) and evaporator.
    Read More
  • Original factory livestock piglet transporter carrier trucks
  • How to find a suitable refrigerated freezer truck?
    October 22, 2019 How to find a suitable refrigerated freezer truck?
    Refrigerated trucks can be called insulation trucks, refrigerated trucks, vans, and refrigerated transport vehicles. Refrigerated trucks are usually used for the transportation of fresh fruits, seafood, milk and items that are prone to spoilage, festering, and fermentation. A refrigerated truck is a closed-type van used to transport frozen or fresh-keeping goods. It is a special refrigerated transport vehicle equipped with a refrigeration device and a polyurethane insulation compartment. It is often used to transport frozen food (refrigerated trucks), dairy products (milk products). Transporter), vegetables and fruits (fresh goods transporter), vaccines and medicines (medicine transporter), fresh meat (meat hooker), takeaway cooked food (insulation vehicle), etc. When buying a refrigerated truck, you must first choose it according to your actual needs. Different people, doing different jobs and running different routes, require different refrigerated trucks. First of all, you must choose a car that is suitable for the local licensing policy and emission environmental protection requirements. Then, according to the goods you are pulling, you can choose a unit with the right temperature. Then, according to the shape of the goods to be pulled, the internal structure of the refrigerated truck is selected. For example, pulling pork requires hooks, and pulling vaccines requires cabinets. There is also the decision to open the door, whether it is necessary to open the door on the side, single or double, etc. Then, it is known that the size of the model is determined according to the distance and quantity of the goods to be pulled: two or three meters of cargo boxes, or more than four meters, or more than six meters of cargo boxes, etc. Then choose your favorite chassis brand, engine brand, etc. The structure of the refrigerated truck: it is the walking part of the car chassis, and the thermal insulation box (generally composed of keel frame, polyurethane thermal insulation material, glass fiber reinforced plastic/stainless steel, etc.), refrigeration unit, temperature recorder in the compartment and other components. Vehicles required, such as meat hook trucks, can be equipped with optional parts such as aluminum alloy meat hook guide rails, waistbands, and ventilation grooves; medical transport vehicles can be equipped with optional accessories such as temperature and humidity recorders and four-sided ventilation grooves. The choice of the car body is related to the specific cargo being transported. Different goods have different requirements for the car body. For example, refrigerated trucks that transport fresh meat need to be customized with hooks on the car body; refrigerated trucks for distribution to stores have small batches, many varieties, and require multi-temperature-layer refrigerated trucks; temperature requirements vary, and frequent loading and unloading requires more doors. All of these, users can customize to the car body factory accor...
    Read More
  • What is Freezer Truck / Refrigearted Truck / Freezer Chiller Van Truck ?
    August 18, 2018 What is Freezer Truck / Refrigearted Truck / Freezer Chiller Van Truck ?
    A Freezer Truck, also called refrigerator truck or chiller lorry, which is a van or truck designed to carry perishable freight at low temperature. For short-distance cooling transport by truck is done by customized freezer trucks, such as ISUZU freezer truck, HOWO freezer truck, DONGFENG freezer truck, FOTON freezer truck, SHACMAN freezer truck, JMC freezer truck, JAC freezer truck, etc. Most long-distance refrigerated transport by truck is done in articulated trucks pulling freezer semitrailers. POWERSTAR is China leading refrigerated trucks manufacturer and supplier, can supply different kinds of freezer trucks and vans for our customer all over the world as follows: 1, ISUZU freezer box truck 2, ISUZU frozen food freezer trucks 3, ISUZU 4*2, 4*4, 6*4, 8*4, refrigerated truck 4, ISUZU 3 T - 40 T freezer truck 5, Customized all ISUZU freezer trucks. 6, Freezer semitrailers for ISUZU, HINO, Mitsubishi, Benz, Man, etc Our refrigerated vans can be equipped with famous refrigeration units, such as Thermo King, Carrier, Guchen Super Snow and other Chinese brand refrigeration units for option. ISUZU mini type NQR 3tons freezer trucks POWERSTAR export 5-10tons refrigerated trucks, equipped with American CARRIER and THERMOKING units Heavy duty ISUZU GIGA model 4x2 and 6x4 refrigerated truck for Seafood and frozen food transportation Special order for customized freezer trucks for Vaccines transportation
    Read More
  • How to find a good Freezer truck body builder?
    February 23, 2018 How to find a good Freezer truck body builder?
    Introduction Freezer Truck body kit (also called Refrigerator Truck body kits, Freezer cooling vehicle body, Refrigerator trucks up structure) suitable used for the transportation of frozen food (refrigerated vehicle ), dairy products (milk transport vehicle), vegetables and fruits (fresh goods transport vehicle), vaccine drugs. Advantages Brand new Freezer Trucks Capacity From 3m3 to 90m3 Refrigeration Unit Brand optional Short delivery time 100% custom-made 12 months Free spare parts Main Parameters TRUCK BODY TYPE What can we do? Freezer Truck Body Yes Freezer Trailer Body Yes Ice Cream Truck Body Yes Dry Freight Truck Body Yes Insulated Cargo Body Yes CKD (completely knock down) Body Yes CBU (completely built up) Body Yes Term Refrigerated truck body Truck chassis brand ISUZU, HINO, VOLVO, BENZ, MAN, Scania, JMC, JAC, Foton, FAW, HOWO, Sinotruk, Shacman, Beiben, Tata, Mitsubishi, Ford, Toyota Standard thickness Front/rear/side panel: 83mm roof/floor panel: 103mm The thickness can be changed according to customer's requirements. Refrigerator brand Thermo king, origin USA Carrier, origin USA Denso, origin JAPAN Kaixue, origin China etc. Temperature +2°C +6°C -10°C -14°C -18°C -25°C Dimension of panel Length 0-15000mm Width 0-3100mm Height 0-3100mm Thickness 33, 43, 63, 83, 103mm Rear Door 2 Panel Full Opening Rolling Door Side door Single Opening Double Opening Single Roll-up door Main characters insulated body 1. Light in weight: 40% lighter than metal body. 2. Better insulation: K value less than 0.3w/m2k.. 3. High in strength and long life: 5 times longer than metal body. 4. Non-corrosion, non-pollution, anti-brine, acid and soda-resisting. 5. Easy to be assembled and repaired at site Packing In CBU (completely built up) and CKD (completely knock down) type Material Surface Fiberglass reinforced plastic Intermediate layer PP honeycomb composited, Edge Protector Aluminum alloy, Stainless steel Door seal EPDM rubber Door frame & Locks 304 stainless steel
    Read More

A total of 1 pages

Leave A Message
Leave A Message
If you are interested in our products and want to know more details,please leave a message here,we will reply you as soon as we can.

Service Online

Home

Products

skype

whatsapp